NOTE: v787 has been factory installed on the following devices:
 
CHD 1802 Ser# 6027 and up
CHD 1812 Ser# 5618 and up. 
 
New Hardware (check S/N label for CHD 1812-1 / CHD 1802-1)
CHD 1802-1 Ser# 1000 and up
CHD 1812-1 Ser# 1000 and up
 
RELEASE NOTESV 787 - [Current Release]*reduced processing delay in frame sync mode
 
---------------------------------
This is a cumulative Upgrade which includes previous releases below:V 786 -  [Current Release]* CHD1812: solved an issue where video delay user settings were not stored properly over a power cycle
 
V 676
+ Added support for 3G - SDI Level B Dual Link signals (selectable in yelloGUI version 2.2.0 and above) for modules CHD18x2-1 (s/n 1000 and above)
* Solved an issue where last luma pixel could be black in the SDI output signal
* Revised "SDI Output Resolution" function for some specific standard combinations
 
V 667
* if a DVI input signal is detected, the output color range is now switched to RGB-full in auto-mode

 
 
V 650
* improved SDI output stability when locking to HDMI input signals with high jitter

V 631
+ added user-delay of video-output feature in lines, pixels or microseconds (CHD1812)
* revised insertion of VPID in second field
* optimized RGB input Range/SDI output range

V 593
* revised SD-SDI output signal for 525 with external reference (CHD1812)

V 590
* revised yellobrik installer (improved LYNX USB driver installation)

V 583
* small bugfixes
 
V 544
* revised image conversion for NTSC input standards
* revised module initialization behavior which could lead to a missing output signal after power-up in some special cases
+ added function which allows HDMI embedded audio insertion into SDI stream A, SDI stream B or
into both streams of 3G-SDI level B dual stream output
+ added function which limits video standards in EDID to a subset of standards for avoiding
problems while using HD-SDI equipment
+ added 3D Frame-Packing support for 1080p30/29/25/24/23 and 720p60/59/50/30/29/25/24/23
+ added yelloGUI support

V 531
* revised SDI output signal of 1080p50 and 1080p60 HDMI inputs
 
V499
* fixed embedding mode if using DVI-D input Signals
* revised handling of some PC input standards
 
V486
* revised handling of 480p and 576p HDMI input standards
* revised colorspace conversion when using RGB HDMI input standards
* changed audio bit depth default for all groups to 20 bits in SDTV mode
* removed AC3 entry from EDID
* revised supported video standard list in the EDID
* fixed Data Block Number (DBN) generation of the audio embedder
* fixed audio selection activation after power up
* fixed audio embedder instability after re-connecting a HDMI source
+ added support for 1080psf23.98 and 1080psF24 reference input standards
+ added insertion of Active Format Description (AFD) to the SDI output  
 
V 472  
+ Fixed blanking for SD-SDI output standards 
+ Fixed vertical start of active video for all standards
+ Fixed audio group selection (for external analog audio) after power up
+ Added audio delay compensation in Reference Lock Mode
+ Added interlacer for 480p/576p to 480i/576i conversions
+ Added support for VGA, SVGA, XGA, WXGA & WUXGA
 
V 470
+ Revised Reference Lock mode to maintain Ref In to SDI Out Zero Timing in Framesync Mode
+ Changed EDID to support AC3 audio streams on the HDMI input+ Revised HDMI input sync to accept unstable HDMI sources
+ Fixed wrong audio channel assignment+ Added suppor