The P VD 5800 O is a low cost utility SDI frame synchronizer which can be used for basic SDI synchronization issues in broadcast. The module offers multi-format support for SDI formats up to 3Gbit/s (auto-detect). The P VD 5800 O also features optional fiber optic I/O.
The module utilizes robust “flywheel” synchronization that will accommodate a wide variety of low quality asynchronous SDI sources. All embedded audio is extracted and delayed automatically to match the video processing delay. Audio is free from disturbances even when dropping and adding frames.
The module also provides up to 62 frames of programmable output delay, adjustable in frames, lines and pixels.
Microprocessor control and on-board Flash RAM enable configurations and settings to be stored within the module.
Remote control, status monitoring and error reporting is possible when using the LYNX APPolo Control System.
NOTE: The use of the APPolo control system is MANDATORY for this module. If installed in a RFR 5012 chassis please make sure a rack controller
(RCT 5023 G) is installed in the rack.
- Supports SDI formats up to 3Gbit (auto-detect)
- Optional fiber I/O
- Robust “flywheel” synchronization for a wide variety of problematic sources
- “Cross lock” compatible reference input
- All 16 channels of audio de-embedded from SDI input, delayed to match video processing delay and re-embedded
- 4 x electrical SDI outputs provided
- Integrated test pattern generator
- Auto-tracking audio delay with no “pops” or “clicks” in audio even when dropping and adding frames
- Up to 62 frames of programmable delay
- Remote control, status monitoring and error reporting possible with LYNX APPolo control system
- Full SNMP support when used with APPolo control system
- Hot swappable
|PVD 5800 O||3G/HD/SD SDI Frame Synchronizer + Optical I/O|
|RFR 5014||2RU Rack Frame + Power Supply (no fans)|
|OH-RX-1 LC/SC/ST||Fiber Optic Basic Receiver Option 10km|
|OH-RX-8-LC||Fiber Optic Receiver Option 80km|
|OH-TR-0-850-MM||Fiber Optic Transceiver Option Multimode (LC)|
|OH-TR-1-LC||3Gbit SDI Optical Transceiver|
|OH-TR-4-XXXX-LC||Fiber Optic CWDM Transceiver Option 40km (XXXX=Wavelength 1270nm to 1610nm)|
|OH-TR-8-XXXX-LC||Fiber Optic CWDM Transmitter Option 80km (XXXX=Wavelength 1270nm to 1610nm)|
|OH-TX-0-850-MM||Fiber Optic Transmitter Option MultiMode|
|OH-TX-4-XXXX-Y-LC||3Gbit SDI Optical Transmitter - CWDM (XXXX=Wavelength 1270nm to 1610nm)|
|OH-TX-8-XXXX-Y-LC||Fiber Optic CWDM Transmitter Option 80km (XXXX=Wavelength 1270nm to 1610nm)|
|RFR 5018||2RU Rack Frame plus Primary Power Supply|