The ORX 1802 is a compact fiber to SDI receiver designed to combat the restrictions involved with the distribution of uncompressed broadcast quality video signals over long distances. When paired with the fiber optic to SDI transmitters (e.g. yellobrik OTX 1812 or OTX 1842) you have a very cost effective optical transmission / receiver system for signals up to 1080p60 (3Gbit/s), while preserving full uncompressed quality.
The OTX 1812 provides 2 SDI outputs and support for LC, ST or SC singlemode fiber connections as well as an LC version suitable for multimode fiber. The ORX 1802 will auto-detect and re-clock any 270Mbit/s, 1.5Gbit/s and 3Gbit/s SDI fiber source and convert to an electrical signal. The module is fully compatible with 3Gbit Level A and Level B formats.
This yellobrik had a major hardware update. If your yellobrik has no usb port on it's length side please visit the yellobrik documents in our downloads section for the datasheet and quick reference.
- Supports SDI video inputs up to 3Gbit/s (1080p60)
- 3Gbit Level A and Level B support (all formats)
- Auto reclocking 270M / 1.5G / 3G
- 2 x SDI outputs
- Versions for LC, ST or SC fiber connections
- Multimode version available
- Input range 1260nm to 1620nm (singlemode)
- Input range 780nm to 880nm (multimode)
- Supports hot swapping and hot plugging
|ORX 1802-2 LC||3Gbit Fiber Optic to SDI Receiver (Singlemode Fiber LC Connector)|
|ORX 1802 ST||3Gbit Fiber Optic to SDI Receiver (Singlemode Fiber ST Connector)|
|ORX 1802 SC||3Gbit Fiber Optic to SDI Receiver (Singlemode Fiber SC Connector)|
|ORX 1802 MM||3Gbit Fiber Optic to SDI Receiver (Multimode Fiber LC Connector)|
|OH-RX-1 LC/SC/ST||Fiber Optic Basic Receiver Option 10km|
|RFR 1200||High power yellobrik 19” 1RU Rack Frame|
|RFR 1001||yellobrik Mounting Bracket|
|LC/SC Sim||LC Connector to SC Connector Adapter Kit|
|LC/ST Sim||LC Connector to ST Connector Adapter Kit|
|P-TAP 1000||P-TAP Battery Adapter Cable|
|XLR 1000||4 Pin XLR Camera Battery Adapter Cable|