Not just a Product...
it's a new way of thinking!
Modular choices…
Robust Rack and Card Based
Powerful yet…
One centralized system
Sync yellow...
finally, bricks done right
Audio and Video...
Test pattern generator
LC Connector to SC Connector Adapter Kit
This option allows the use of SC fiber connections on the OTT 1812 and includes a 0.5m (19.6") tail (SMF). Adapter cable introduces less than 0.25dB attenuation.
LC Connector to ST Connector Adapter Kit
This option allows the use of ST fiber connections on the OTT 1812 and includes a 0.5m (19.6") tail (SMF) and 2 x ST/ST sex changer adapter. Adapter cable introduces less than 0.25dB attenuation.
This option allows the use of an SC fiber connection to the OTX 1810 and includes a 0.5m (19.6") tail (SMF). Adapter cable introduces less than 0.25dB attenuation.
This option allows the use of an ST fiber connection to the OTX 1810 and includes a 0.5m (19.6") tail (SMF) and 1 x ST/ST sex changer adapter. Adapter cable introduces less than 0.25dB attenuation.
25 Pin SubD Adapter PCB
The 25Pin SubD adapter PCB is provided to make balanced audio I/O connections to LYNX D type Series 5000 CardModules fitted with a 25 Pin Sub D connector. Connection ID is shown below for each module. Simply locate the module in the vertical column and then read of the connector number and ID from...
15 Pin SubD Adapter PCB
The 15Pin SubD adapter PCB is provided to make balanced audio I/O connections to LYNX D type Series 5000 CardModules fitted with a 15 Pin Sub D connector. Connection ID is shown below for each module. Simply locate the module in the vertical column and then read of the connector number and ID from...
Audio Breakout cable 25 SubD to 8 x Male XLR
Audio Breakout Cable 15 SubD to 4 x Female XLR
Audio Breakout cable 25 SubD to 8 x Female XLR
Audio Breakout cable 25 SubD to 4 x Female / 4 x Male XLR
Dual Channel 3Gbit SDI Optical Receiver
The OH-RR-1 dual channel SDI optical receiver is an integrated part or plug in option for select LYNX Technik yellobrik and Series 5000 products. This module facilitates the conversion of two independent SDI optical signal into electrical signals for further processing within these products. Support...
3Gbit SDI Optical Transmitter - CWDM (XXXX=Wavelength 1270nm to 1610nm)
The OH-TX-4-XXXX SDI optical transmitter is a CWDM fiber plug in option for select LYNX Technik yellobrik and Series 5000 products. This SFP module facilitates the conversion of an electrical SDI signal into an optical signal for transmission over fiber. 18 wavelength selections are available for...
3Gbit SDI Optical Transceiver
The OH-TR-1- SDI optical transceiver is an integrated part or plug in option for select LYNX Technik yellobrik and Series 5000 products. This SFP module includes a receiver and a transmitter which facilitates the conversion of an electrical SDI signal into an optical signal for transmission over...
Fiber Optic Basic Receiver Option 10km
The OH-RX-1 SDI optical receiver is an integrated part or plug in option for select LYNX Technik yellobrik and Series 5000 products. This module facilitates the conversion of the SDI optical signal into an electrical signal for further processing within these products. Support is provided for all...
Fiber SFP Data Transceiver (CWDM) 40km
The OH-TR-54-XXXX Data optical transceiver is a plug in option for select LYNX Technik yellobrik and Series 5000 products. This SFP module includes a receiver and a transmitter which facilitates the conversion of an electrical data signal into an optical signal for transmission over fiber, and will...
Fiber SFP Data Transceiver (CWDM) 80km
The OH-TR-58-XXXX Data optical transceiver is a plug in option for select LYNX Technik yellobrik and Series 5000 products. This SFP module includes a receiver and a transmitter which facilitates the conversion of an electrical data signal into an optical signal for transmission over fiber, and will...
Dual Fiber Optic CWDM Transmitter Option 40km (XXXX-XXXX = Wavelength 1270/1290nm to 1590/1610nm)
The OH-TT-4-XXXX-XXXX dual channel SDI optical transmitter is aCWDM fiber plug in option for select LYNX Technik yellobrik and Series5000 products.
This SFP module facilitates the conversion of twoelectrical SDI signals into optical signals for transmission over two fiberlinks. 9 wavelength...
Dual Fiber Optic Basic Transmitter Option 10km
The OH-TT-1 Dual channel SDI optical transmitter is an integrated part or plug in option for select LYNX Technik yellobrik and Series 5000 products. This SFP module facilitates the conversion of two electrical SDI signals into optical signals for transmission over two fiber links. Wavelength is a...
Fiber Optic CWDM Transmitter Option 80km (XXXX=Wavelength 1270nm to 1610nm)
The OH-TR-8-XXXX SDI optical transceiver is a plug in option for select LYNX Technik yellobrik and Series 5000 products. This SFP module includes a receiver and a transmitter which facilitates the conversion of an electrical SDI signal into an optical signal for transmission over fiber, and also...
The OH-TX-8-XXXX SDI optical transmitter is a CWDM fiber plug in option for select LYNX Technik yellobrik and Series 5000 products. This SFP module facilitates the conversion of an electrical SDI signal into an optical signal for transmission over fiber. 18 wavelength selections are available for...
Bidirectional (Single Fiber) Transceiver
The OH-BD-1-1550 SDI bidirectional optical transceiver is an integrated part or plug in option for select LYNX Technik yellobrik and Series 5000 products. This SFP module transmits an optical SDI signal and also receives an optical SDI signal over a single fiber link. TX Wavelength is a fixed 1550nm...
Fiber Optic CWDM Transceiver Option 40km (XXXX=Wavelength 1270nm to 1610nm)
The OH-TR-4-XXXX SDI optical transceiver is a plug in option for select LYNX Technik yellobrik and Series 5000 products. This SFP module includes a receiver and a transmitter which facilitates the conversion of an electrical SDI signal into an optical signal for transmission over fiber, and also...
Fiber Optic Transceiver Option Multimode (LC)
The OH-TR-0-850-MM SDI optical transceiver is an integrated part or plug in option for select LYNX Technik yellobrik and Series 5000 products. This SFP module includes a receiver and a transmitter which facilitates the conversion of an electrical SDI signal into an optical signal for transmission...
Fiber Optic Receiver Option 80km
The OH-RX-8 high sensitivity SDI optical receiver is a plug in option for select LYNX Technik yellobrik and Series 5000 products. This module facilitates the conversion of the SDI optical signal into an electrical signal for further processing within these products. Support is provided for all...
Fiber Optic Dual Receiver Option 80km
The OH-RR-8 dual channel SDI optical receiver is an integrated part or plug in option for select LYNX Technik yellobrik and Series 5000 products. This module facilitates the conversion of two independent SDI optical signals into electrical signals for further processing within these products....
Data Optical Transceiver - Multimode
The OH-TR-50-850-MM Data optical transceiver is a plug in option for select LYNX Technik yellobrik and Series 5000 products. This SFP module includes a receiver and a transmitter which facilitates the conversion of an electrical data signal into an optical signal for transmission over fiber, and...
Data Optical Transceiver - Singlemode 10km
The OH-TR-51 Data optical transceiver is a plug in option for select LYNX Technik yellobrik and Series 5000 products. This SFP module includes a receiver and a transmitter which facilitates the conversion of an electrical data signal into an optical signal for transmission over fiber, and will also...
Dual Fiber Optic CWDM Transmitter Option 80km (XXXX-XXXX=Wavelength 1270/1290nm - 1590/1610nm)
The OH-TT-8-XXXX-XXXX Dual channel SDI optical transmitter is a CWDM fiber plug in option for select LYNX Technik yellobrik and Series 5000 products. This SFP module facilitates the conversion of two electrical SDI signal into optical signals for transmission over two fiber links. 18 wavelength...
3Gbit SDI Optical Receiver (High Sensitivity)
The OH-RX-APD is a very high sensitivity SDI optical receiver supplied
as a plug in option for select LYNX Technik products. This module
facilitates the conversion of the SDI optical signal into an electrical
signal for further processing within these products. Supports all
wavelengths between...
3Gbit SDI SFP Coaxial Transceiver
The OH-TR-SDI coaxial transceiver is a fully integrated plug in option forselected LYNX Technik products. This facilitates converting the integratedfiber I/O SFP socket included in the products to now accept electricalSDI signals.
The module accommodates 270Mbit, 1.5Gbit and 3Gbit SDI signalsconfor...
1310nm Multimode Optical Transceiver
The OH-TR-MADI-1310-MM optical transceiver is a plug in option forselect LYNX Technik yellobrik and greenMachine products. Specificallythis option is intended to convert the LYNX OTR 1210 MM MADITransceiver module from the standard 850nm to 1310nm wavelength.This is also a plug in option for...
The OH-BD-1-1310 SDI bidirectional optical transceiver is an integrated part or plug in option for select LYNX Technik yellobrik and Series 5000 products. This SFP module transmits an optical SDI signal and also receives a SDI signal over a single fiber link, TX Wavelength is a fixed 1310nm and...
Bi-directional Gigabit Ethernet Transceiver
The OH-BD-51-1550-LC optical bi-directional gigabit ethernettransceiver is an integrated part or plug in option for select LYNXTechnik greenMachine, yellobrik, and Series 5000 products. This SFPmodule transmits an optical data signal and also receives an opticaldata signal over a single fiber link....
The OH-BD-51-1310-LC optical bi-directional gigabit ethernettransceiver is an integrated part or plug in option for select LYNXTechnik greenMachine, yellobrik, and Series 5000 products. This SFPmodule transmits an optical data signal and also receives an opticaldata signal over a single fiber link....
12G SDI Single Channel Electrical Receiver
The OH-RX-12GSDI single channel electrical receiver is an integrated plug in option for selected LYNX Technik products. This SFP module facilitates the transmission of SDI electrical signals up to ST-2082-1 (12G), ST-2081-1 (6G), ST-424 (3G) and ST-292 (HD) via high density BNC connector. This...
12G SDI Single Channel Electrical Transmitter
The OH-TX-12GSDI single channel electrical transmitter is an integrated plug in option for selected LYNX Technik products. This SFP module facilitates the transmission of SDI electrical signals up to ST-2082-1 (12G), ST-2081-1 (6G), ST-424 (3G) and ST-292 (HD) via BNC connector. This module is...
Audio Conversion
Video Conversion
Fiber Conversion
Video Distribution
Audio Distribution
Fiber Splitters
Fiber Mux/Demux
Video Switching
Frame Synchronizers
Embed / De-embedding
Image Processing
Rack Frames
Rack Controllers
Accessories
